ScH-Share™

Buat yang punya wireless TL-MR3020 yang tentunya menggunakan modem, anda bisa menambahkan singnal pancaran wifi nya dengan menambahkan antena external 2x3dBi atau selebihnya tergantung kebutuhan anda seperti contoh gambar di bawah



Pertama siapkan :

• 1 antena wifi 3dBi atau selebihnya
• Pigtail untuk antena dan kabel
• perlengkapan solder

Cara membuatnya:
buka cover depan wireless tl-mr3020 agar terlihat jelas pcb wireless tersebut,siapkan antena sesuai kebutuhan beserta pigtailnya,pasang pigtail di cover samping jng lupa di lubangi.

   


Cara penyolderan :
 potong jalur antena yg bertulisan ant 2 seperti gambar di bawahdengan pisau karter , kemudian pasang dan solder kabel pigtail antena kemudian solder

 

 
Dengan mengikuti cara-cara pembuatan penguat signal wifi seperti di atas kita bisa menghasilkan jangkauan signal wifi lebih jauh dari yang aslinya yang tadinya hanya mencakup 2 ruang sekitar sudah mencakut 4 ruangan/kamar atau lima dengan signal full.


English Translate :
Creating External Antenna TL-MR3020






Create a wireless TL-MR3020 which must use a modem, you can add wifi singnal its emission by adding external antennas 2x3dBi or rest depends on your needs as an example the picture below



First, prepare:

•      A wifi antenna 3dBi or rest
•      Pigtail for the antenna and cable
•      soldering equipment

How to make:

open the front cover tl-mr3020 wireless to the wireless pcb pins, set the antenna according to the needs of its pigtailnya, attach the pigtail on the side do not forget to cover the holes.
 

Soldering ways:
cut lines which marked ant antenna 2 as shown below with a knife crankcase, then plug the antenna pigtail cable and solder then solder
 

By following the ways of making wifi signal amplifier as above we can produce a range of a wifi signal farther than the original which was only included two have covered a space about 4 or 5 rooms with full signal.